Search found 261 matches

by glittering-prize67
Tue Mar 31, 2020 1:00 pm
Forum: Questions and Answers
Topic: To repaint my Sega Bell or leave original?
Replies: 51
Views: 12592

Re: To repaint my Sega Bell or leave original?

Unless you are stripping mech be careful using paraffin. I have found it can sometimes react with old grease and it sets like concrete. When I did my KB Discomatics I used gunk applied with a brush, then rinse or wipe off ready for new lube. As for painting, I always do, but that's my preference. Un...
by glittering-prize67
Mon Mar 23, 2020 5:54 pm
Forum: Build a Slot Machine
Topic: Conveyor & Rollercoaster
Replies: 13
Views: 4893

Re: Conveyor & Rollercoaster

Whatever coins come out equates to 3 selections - that's what I've set it to.
by glittering-prize67
Sun Mar 22, 2020 8:26 pm
Forum: Build a Slot Machine
Topic: Conveyor & Rollercoaster
Replies: 13
Views: 4893

Re: Conveyor & Rollercoaster

It's quite simple. It's basically like a waterwheel - each segment holds coins, and when aligned at bottom they drop out, so I can put whatever coins I want in, and for each coin deposited it pays out whatever is in each section. Works very well too.
by glittering-prize67
Fri Mar 20, 2020 10:41 pm
Forum: Build a Slot Machine
Topic: Conveyor & Rollercoaster
Replies: 13
Views: 4893

Re: Conveyor & Rollercoaster

I made this for my jukebox,so you get 3 selections for coins out,it cost £210 for 3 gear wheels I had made for repairing the transfere motors.I like using coins,so I put coin in,then insert the American coins in the jukebox.brill.This was mainly made from old off cuts of wood,but I did buy the motor...
by glittering-prize67
Wed Mar 18, 2020 11:03 pm
Forum: Build a Slot Machine
Topic: Conveyor & Rollercoaster
Replies: 13
Views: 4893

Re: Conveyor & Rollercoaster

Here is the change machine I made.been finished about 2 weeks
by glittering-prize67
Sat Mar 14, 2020 11:23 pm
Forum: Build a Slot Machine
Topic: Conveyor & Rollercoaster
Replies: 13
Views: 4893

Re: Conveyor & Rollercoaster

Pictures from me or the other guy? I'm thinking of making another Conveyor for myself. I've just made a change machine for my jukebox and it's got me in the mood.
by glittering-prize67
Sat Feb 22, 2020 4:39 pm
Forum: Build a Slot Machine
Topic: Conveyor & Rollercoaster
Replies: 13
Views: 4893

Re: Conveyor and rollercoaster

Not sure if you seen it or not, I did a lot of work for Darren Hesketh too with his old penny arcade, mainly working models.
by glittering-prize67
Thu Feb 20, 2020 9:58 pm
Forum: Build a Slot Machine
Topic: Conveyor & Rollercoaster
Replies: 13
Views: 4893

Conveyor & Rollercoaster

Hi all, not been around for a while. Yes, it was me that made the Conveyors and I made a bigger one called Elevator. I also made two small Rollercoasters and a large one in a dark wood cab called Mountain Descent. I've also made quite a few other games Inc Howzat and Jelly Fingers, which were simila...
by glittering-prize67
Thu Oct 11, 2018 10:27 pm
Forum: Questions and Answers
Topic: Change machine
Replies: 8
Views: 2898

Re: Change machine

Tried what you suggested and with a bit of playing, maths and pen and paper, I now have it working correctly. Many thanks !!YIPPEE!!
by glittering-prize67
Thu Oct 11, 2018 6:20 pm
Forum: Open Forum
Topic: Stolen Moon Money Aristocrat machine
Replies: 6
Views: 2627

Re: Stolen Moon Money Aristocrat machine

If you have anything of value especially a machine why would it be in a damp horrible shed. That is a sure way to knacker them up. Keep them indoors, safe, warm and where they should be.