FORUM

Does anyone know how much I should expect to pay for a back bonnet for a sega. I bought one off another site turned out to be a clone but hay ho.
If you have a original for sale and not looking the earth for it send me a private message.

Is this overpriced, also I take it Coca-Cola is not original?

Trying to get a better picture, due to the flag thing on it. The one I have is different to the one in the picture, as it's on a top box which is broken (the box not the glass).

Yes I meant repro

Does anyone know where I could get this pay card repo or original?

Looking at the part closely it seems to be welded before at some point. I have managed to find another original kicker. With that and the timing adjusted do most people think it will solve it? The person that had it before me had issues with it and thought putting grease everywhere would be a good i...

Just like to say a big thank you to Widget2k4 and coppinpr for pointing me in the right direction as I didn't have a clue.
Thanks again much appreciated.

Anyone any ideas where I could get a reel kick ( part number 3f-8398) with springs from. The springs on my part seem homemade.

I have to take part A off and put it below part T which gets it to work (which is why there's no split pin on). I'm guessing that part T needs adjusting but unsure in case there's something else I should be looking at. Other than this everything seems to go back in place.

The machine does fire up but only once before you have to move that slanted thing back down. It seems very violent. The other part is from behind the coin chute. It connects to the payout disks. I just don't know were the spring is actually meant to go. The machine is a Sega Monaco and has an electr...

Thanks for your replies. 1506263141748a.jpg In the first picture where does the spring go (looked everywhere just can't seem to tell it was connected to the slides on the bottom seemed wrong). In the second picture the machine end up this way with the push thing the wrong way round. The two things m...

Does anyone know who would service a Mills/ Sega mechanism in Northern Ireland? Any help greatly appreciated.