Page 1 of 1

Anyone seen this Little Fivewin mechanism?

Posted: Mon Sep 28, 2020 7:53 pm
by martynbr
Hi, I have seen this Allwin Five Win for sale but the mechanism in the back is different to another one I have, anyone seen this set up before and is it correct? it does payout coins but I cannot see how it would do it with this.

Thanks

Re: Anyone Seen This Mechanism?

Posted: Mon Sep 28, 2020 8:04 pm
by pennymachines
I don't think I'm familiar with this one. How do you know it pays out coins? Is that what the seller said?
It looks like it's designed to vend packets of some sort. I guess it could vend coins if you put them in packets... !PUZZLED!

Re: Anyone Seen This Mechanism?

Posted: Mon Sep 28, 2020 8:06 pm
by badpenny

Untitled.png
Untitled.png (294.8 KiB) Viewed 3636 times

It'd probably help if this part was fitted correctly.
It should be fitted horizontally instead of upside out.

BP

Re: Anyone Seen This Mechanism?

Posted: Mon Sep 28, 2020 8:33 pm
by pauljt71
May be totally wrong but looking at the prize hopper this may vend a single cigarette...win a cig etc?

Re: Anyone Seen This Mechanism?

Posted: Mon Sep 28, 2020 9:22 pm
by geofflove
Yep - looks like a win a cig or similar.

Re: Anyone Seen This Mechanism?

Posted: Tue Sep 29, 2020 12:16 am
by martynbr
This the front of the machine and looks like it's a coin slot at the front and not wide enough for whatever it's vending. Seems something has changed at one point. Was interested in it but looks like it's wrong and won't vend anything through that slot.

Re: Anyone Seen This Mechanism?

Posted: Tue Sep 29, 2020 12:27 pm
by pennymachines
As others have suggested, it looks like it might vend a single cigarette, but that would still be too wide for the penny payout slot. Strange mismatch.

Re: Anyone Seen This Mechanism?

Posted: Tue Sep 29, 2020 2:14 pm
by treefrog
Looking on the inside on the award hole, it looks big enough for the prize and the coin return plate on the front does not look right with newer screws, so wonder if this has been stuck on.

Re: Anyone Seen This Mechanism?

Posted: Wed Sep 30, 2020 4:32 pm
by martynbr
Anyone know where I could get a new opening to dispense the cigarettes? Im trying to get this and just planning to see if I can get the parts first.

Thanks

Re: Anyone Seen This Mechanism?

Posted: Wed Sep 30, 2020 6:13 pm
by pennymachines
I think it unlikely that you will find a suitable casting, but you could fabricate something I guess. The one below is typical of the period.