Prince August casting for Wonders coin slot
- badpenny
- Forum Moderator
- Posts: 7211
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 25
- Location: East Midlands
Re: Prince August casting for Wonders coin slot
If you Google it you'll find their website.
They make kits for the hand casting, tiny soldiers and then painting them brigade.
The metal ingots they sell for home casting are low melting point products and tend to wear or scratch easily, however it is very satisfying to make your own.
BP
They make kits for the hand casting, tiny soldiers and then painting them brigade.
The metal ingots they sell for home casting are low melting point products and tend to wear or scratch easily, however it is very satisfying to make your own.
BP
-
- Site Admin
- Posts: 6638
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 56
- Location: The Black Country
Re: Prince August casting for Wonders coin slot
Prince August is the product brand name of the Toy Soldier Factory founded by a Swede in Kilnamartyra Village, Macroom, Co. Cork, Ireland. They sell several low melt white metals:
Why they adopted the name of a pro-Nazi Prussian prince remains a mystery to me.PA2047: Model Metal (54% Lead / 11% Tin / 35% Bismuth). It contains bismuth which reduces the melting temperature and shrinkage. While most alloys shrink while solidyfing, Model metal does not. Melts at 138°C (280°F). Cast at 300-320°C.
PA2057: Standard Metal (65% Lead / 2% Antimony / 33% Tin). Melts at 210°C (410°F). Cast at 320-340°C.
PA2060: 5 Star Metal (94.5% Tin / 3% Zinc / 2.5% Antimony) is the safest metal as it is lead free. Melts at 230° C (446° F). Cast at 320-340°C.
Re: Prince August casting for Wonders coin slot
After using both the 5 star metal and the standard metal for the wonders coin slot they both had similar results.
They both, when cleaned up with a fine wet and dry paper produce an acceptable shine. The downside is, being a soft metal as BP states they do scratch easily.
I suppose a positive side is that you can always melt it down again and make another one, but I think there is maximum number of times you can do this before adding new metal.
They both, when cleaned up with a fine wet and dry paper produce an acceptable shine. The downside is, being a soft metal as BP states they do scratch easily.
I suppose a positive side is that you can always melt it down again and make another one, but I think there is maximum number of times you can do this before adding new metal.
Wonders coin entry
Topic moved & merged - Site Admin.
Remember some time ago one of forum members cast a wonders coin entry and can't find thread anywhere so hoping by starting new post may jog someone's memory. I want to try the same thing and am looking for ideas as to materials to use. Think making the mould will be fairly straight forward as I have another to use as a template. Was thinking of trying this plumbers material but unsure as to how effective it might be.
Remember some time ago one of forum members cast a wonders coin entry and can't find thread anywhere so hoping by starting new post may jog someone's memory. I want to try the same thing and am looking for ideas as to materials to use. Think making the mould will be fairly straight forward as I have another to use as a template. Was thinking of trying this plumbers material but unsure as to how effective it might be.
Last edited by polaris on Mon Aug 22, 2016 7:15 pm, edited 1 time in total.
- badpenny
- Forum Moderator
- Posts: 7211
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 25
- Location: East Midlands
Re: Wonders coin entry
You'll have two issues using tin or other soldering materials for casting.
1- Shrinkage once cooled
2 - The end result will produce a soft product which wears quickly.
BP
1- Shrinkage once cooled
2 - The end result will produce a soft product which wears quickly.
BP
Re: Wonders coin entry
Think you could be right on both counts BP thought of that initially believing it to be harder wearing than lead and still don't need extreme temperatures to melt. sure will come up with something when get a chance to search web
Re: Wonders coin entry
I made a Wonders coin slot out of Prince August, and although it's a soft metal, it still looks good today.
I posted it on the forum back in May 22, 2014.
I posted it on the forum back in May 22, 2014.
Re: Wonders coin entry
Thanks Alan that was the post I was referring to made it easier to find thanks
Now merged above - Site Admin.
Now merged above - Site Admin.
Re: Prince August casting for Wonders coin slot
Looks perfect for the job Alan any particular silicone putty that you used ?
Re: Prince August casting for Wonders coin slot
The putty I used was -
Siligum Gedeo Pebeo Silicone Moulding Paste, you can obtain it easily online.
Siligum Gedeo Pebeo Silicone Moulding Paste, you can obtain it easily online.
Re: Prince August casting for Wonders coin slot
Do you recall how much moulding paste you used for the coin entry Alan, I see there are a number of different quantities available.
Re: Prince August casting for Wonders coin slot
I'm still waiting on the putty arriving but I thought it would give this a try. The company reckons it's slightly harder wearing than Prince August and me being a tight a$$e thought it was better value for money. 500g Premium Pewter Shot / Grain White Metal for casting. Buy From THE EXPERTS eBay number 222235435821
Re: Prince August casting for Wonders coin slot
The Prince August, being a softer metal had a lower melting point, ideal for when you're having to melt it down on the cooker in the kitchen. A sound tip is try to do the casting when the wife isn't about, and don't use one of her best saucepans. .
Re: Prince August casting for Wonders coin slot
Strange that they don't bother to mention that melting point of the pewter shot they're selling?
Re: Prince August casting for Wonders coin slot
That was one of the questions I asked, Gameswat - this was the reply:
Dear Sirs,
The melting point of pewter is around 250°C. As for being hardwaring in comparison to Prince August metal. Would you happen to know the composition of the pewter so we can advise accordingly?
Kind Regards,
British Tin
Re: Prince August casting for Wonders coin slot
Hi
I have been reading all of this on the Prince August and making your own parts. I like the idea, and would like to give it a go.
Would it work to make a "BALL LEVER"??? or would it be too soft?
scottie
I have been reading all of this on the Prince August and making your own parts. I like the idea, and would like to give it a go.
Would it work to make a "BALL LEVER"??? or would it be too soft?
scottie
- badpenny
- Forum Moderator
- Posts: 7211
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 25
- Location: East Midlands
Re: Prince August casting for Wonders coin slot
It would be possible, but might need to be made quite chunky in order to take support webs in the casting.
If you're referring to the ball release lever and it's the escapement type that due to its rocking movement allows a ratchet wheel to turn (that was clear as mud wasn't it?) then they're quite easy to make out of brass plate.
I think JC was selling them some years back.
If you're referring to the ball release lever and it's the escapement type that due to its rocking movement allows a ratchet wheel to turn (that was clear as mud wasn't it?) then they're quite easy to make out of brass plate.
I think JC was selling them some years back.
Re: Prince August casting for Wonders coin slot
No I was thinking of another part....
When you get the ball in the winning cup it hits the "lever", which allows you to turn the knob and get paid. I think they're just solid brass... I have one to copy, so that makes it a lot easier.
scottie
When you get the ball in the winning cup it hits the "lever", which allows you to turn the knob and get paid. I think they're just solid brass... I have one to copy, so that makes it a lot easier.
scottie
- badpenny
- Forum Moderator
- Posts: 7211
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 25
- Location: East Midlands
Re: Prince August casting for Wonders coin slot
That's the lever the ball comes to rest upon.
Like a see saw by sitting on one end it tips the other up to clear the stop.
I've never seen one for sale, but have made them in the past from "U shaped Brass lengths" This sort of thing we can get it from model shops or even some of the large national DIY chain stores.
Being U shaped it has strength.
You only have to get the length exactly right so the ball doesn't drop before it's cleared the stop.
Drill a hole to pivot it, and it's done.
BP
Like a see saw by sitting on one end it tips the other up to clear the stop.
I've never seen one for sale, but have made them in the past from "U shaped Brass lengths" This sort of thing we can get it from model shops or even some of the large national DIY chain stores.
Being U shaped it has strength.
You only have to get the length exactly right so the ball doesn't drop before it's cleared the stop.
Drill a hole to pivot it, and it's done.
BP
Who is online
Users browsing this forum: No registered users and 7 guests