Duomat penny slot machine

Somebody knows... Maybe you?
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

Thanks, helpful. Still need the other half (door) though or the mech might get damages with use.
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Duomat penny slot machine

Post by badpenny »

I may have the frame for the back bit, probably tatty as hell, but it's a start.

BP
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

BP you are a life saver! I can deal with the cosmetics not a prob. How do we proceed? Mei-mei
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

P.S. BP, I have attached a pic of the mech attached to the handle at bottom of the machine. It would seem it is missing a part where the rod attaches. Might you also have one of these?
Attachments
back-1-(2)a.jpg
back-1-(2)a.jpg (9.97 KiB) Viewed 2552 times
User avatar
coppinpr
Posts: 5110
Joined: Sun Oct 10, 2010 2:01 pm
Reaction score: 20
Location: Lewes, East Sussex
Contact:

Re: Duomat penny slot machine

Post by coppinpr »

How do we proceed?
1st thing is you have to laugh at BP's jokes. It's not easy but pays dividends !!THUMBSX2!!
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

Wow you wanna make this really hard. Ok, he he he he he !WORSHIPFULL!
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Duomat penny slot machine

Post by badpenny »

mei-mei wrote:P.S. BP, I have attached a pic of the mech attached to the handle at bottom of the machine. It would seem it is missing a part where the rod attaches. Might you also have one of these?
This really is your lucky day!
I'm aiming to collect all my babies Sun 18th December. :cool:
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

All hail BP all hail BP!!!!! !!YIPPEE!!
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Duomat penny slot machine

Post by badpenny »

I was running out of room in the truck, so didn't get to load all of my machines, but remembered to dig out the "gash" Duomat.
Turns out it has 3 sides of the front case but none of the rear part - sorry
The mech is lacking payout tubes, slides and clock - but I seem to recall you're ok on that front.

I think it's the handle and gubbins you need.

Look at the photos and have a think.
Attachments
mech from side.jpg
handle mech.jpg
front of mech.jpg
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Duomat penny slot machine

Post by badpenny »

Closer ones of what the back of the handle mechanism should look like ......
Attachments
handle3.jpg
handle2.jpg
handle1.jpg
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

Hi, sorry for the late reply, I have been away for a few days. Yes that's the baby. I need the connecting shaft thingy and the bit it is immediately attached to. Thats a great start for me thank you so much. Keep an eye out for a back of some sort. What do I need to do now? Mei-mei
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

Just had a thought, if you don't need the three sides particularly, could I canibilise them to make a back? Mei-mei
User avatar
arrgee
Posts: 1589
Joined: Thu Feb 08, 2007 11:56 am
Reaction score: 5
Location: North Wiltshire

Re: Duomat penny slot machine

Post by arrgee »

mei-mei wrote:Just had a thought, if you don't need the three sides particularly, could I canibilise them to make a back? Mei-mei
Might be tricky mei-mei, but not impossible, as the rebate in the door would be the wrong way round
Attachments
image-a.jpg
User avatar
arrgee
Posts: 1589
Joined: Thu Feb 08, 2007 11:56 am
Reaction score: 5
Location: North Wiltshire

Re: Duomat penny slot machine

Post by arrgee »

Forgot to say that this continuous rebate substantially contributes to the overall stability and strength of the case especially as the mechanism is supported off the door.
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

Thanks for your concern. The only thing I have in my favour is that I have a background in furniture restoration so, fingers crossed this should not be too much of an issue.
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Duomat penny slot machine

Post by badpenny »

Hokey Cokey .......

This is the case, which is minus the bottom width. You can see the dials because the mechanism is still sitting in it.
I'd sell it with the front casting and handle as I can't be bothered to dismantle that assembly.
with wheels.jpg

This is the gubbins that is on the back of the handle, you look to be missing part of the turret and ratchet.
017a.jpg

In this photo I've left the mechanism in (you can have that as well if you need it, it looks cleaner than yours and has no Monkey Metal deterioration, it's missing the payout slides and tube, also the clock.) I think you need both linkages indicated by white arrows so, even if you don't want the mechanism I'll include them, what about the one by the yellow arrow?
018a.jpg

So over to you, what do you want ..... what do you not want?

BP (Who's sure he knows if you're male or female) **xXx**
User avatar
gameswat
Posts: 2196
Joined: Sat May 30, 2009 5:17 am
Reaction score: 21
Location: perth, australia

Re: Duomat penny slot machine

Post by gameswat »

From what I recall the rebate or groove in the front door is made identically to the rear, but the rear had a piece of wood glued in to make the tongue. So, easy enough to glue a similar piece of wood into the female front groove to make it a male back door!
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

Hi BP, could you give me an idea of what you want for the whole thing plus postage. I can manage without some of the bits but I can't get to the machine to check at the mo because I am at my daughters house for a few days and not because I am in PRISON! :HaHa:

Not really rocket science to work out which gender I am as I signed my email to you using my first name. '!'
Last edited by mei-mei on Thu Dec 29, 2016 7:05 pm, edited 1 time in total.
User avatar
mei-mei
Posts: 220
Joined: Sat Dec 03, 2016 8:41 am
Reaction score: 0

Re: Duomat penny slot machine

Post by mei-mei »

Hi gameswat, yep I notice that too and have already in my posession appropriate ply for the job. Mei-mei
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Duomat penny slot machine

Post by badpenny »

mei-mei ......... please email me your postcode, then I'll draw you up a figure.
Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests