I need help to specify construction
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
I need help to specify construction
Hi all, I was idling searching ebay Asia when I suddenly became fascinated with Rolex watches.
Do can anyone supply me with the exact specifications for building these only for my interest.
I must to know how the ticking of the hands do make the sun go down at same time every each day ?
Why window with number of day know to alter calender on my kitchen wall ?
I wait for someonebody to spend hours writing careful exactness before I reply and with other kestion ask why second hand is actually third hand.
Badpenny
Do can anyone supply me with the exact specifications for building these only for my interest.
I must to know how the ticking of the hands do make the sun go down at same time every each day ?
Why window with number of day know to alter calender on my kitchen wall ?
I wait for someonebody to spend hours writing careful exactness before I reply and with other kestion ask why second hand is actually third hand.
Badpenny
- Yorkshire Pudding
- Posts: 45
- Joined: Thu Dec 02, 2004 11:31 am
- Reaction score: 0
- Location: Oop North (in Harrogate, Yorkshire)
- Yorkshire Pudding
- Posts: 45
- Joined: Thu Dec 02, 2004 11:31 am
- Reaction score: 0
- Location: Oop North (in Harrogate, Yorkshire)
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Mata Hari Pinball
Is can anyone show me to diagram of part 801 for Mata Hari pinball? I didn't know how it work inside but know where I can sell one in Yorkshire.
Badpenny
ps is somebody can share with me a detailed specification for where Yorkshire ?
Badpenny
ps is somebody can share with me a detailed specification for where Yorkshire ?
- Yorkshire Pudding
- Posts: 45
- Joined: Thu Dec 02, 2004 11:31 am
- Reaction score: 0
- Location: Oop North (in Harrogate, Yorkshire)
-
- Site Admin
- Posts: 6650
- Joined: Wed Nov 06, 2002 12:12 am
- Reaction score: 59
- Location: The Black Country
I for one have been entertained and educated by Coin-op's valiant attempt to put into words and numbers the inner workings of an allwin. It hadn't occurred to me how complicated it would be to describe the interlinked parts and sequence of events. I guess this is one reason the patents run to so many pages.
I hope at some stage to put together an interactive animated Flash diagram of a transparent allwin, but in the meantime I'm mystified by the sudden surge of interest from our friends in the Middle East and beyond in the precise specifications of the allwin mechanism.
I hope at some stage to put together an interactive animated Flash diagram of a transparent allwin, but in the meantime I'm mystified by the sudden surge of interest from our friends in the Middle East and beyond in the precise specifications of the allwin mechanism.
- Attachments
-
- nuclear-allwin.gif (28.22 KiB) Viewed 10469 times
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Call me a cynical and suspicious old sod, but I strongly suspect the appeal of attracting a sum of money equivalent to 3 months salary for a graduate working in a call centre in exchnage for knocking up a wooden box containing a few bits of tin and a ball bearing, might have something to do with it.
Incidently the control rod from the reactor on mine goes direct to the back pedalling mudguards!
Badpenny
Incidently the control rod from the reactor on mine goes direct to the back pedalling mudguards!
Badpenny
- bryans fan
- Posts: 823
- Joined: Mon Feb 03, 2003 10:15 pm
- Reaction score: 7
- Location: Somerset
- john t peterson
- Posts: 1336
- Joined: Wed Dec 01, 2004 5:40 pm
- Reaction score: 7
- Location: USA
-
- Posts: 762
- Joined: Thu Feb 02, 2006 6:05 pm
- Reaction score: 0
- Location: staffordshire
-
- Posts: 8
- Joined: Sat Nov 04, 2006 10:11 pm
- Reaction score: 0
- Location: london
Allwin plans (make your own)
HI, i have read with interest the replies to questions on making your own machines. I note most state that no plans or drawings were available. I was wondering, how then did the current reporduction machines get made???
i wonder if anyone has contacts to provide detailed plans through this source??
i wonder if anyone has contacts to provide detailed plans through this source??
Who is online
Users browsing this forum: No registered users and 2 guests