Bingolett..... help please!

American, British, French or German? We want to know about it.
widget2k4
Posts: 1385
Joined: Tue Aug 27, 2013 8:32 am
Reaction score: 0

Re: Bingolett..... help please!

Post by widget2k4 »

Haha you enjoy it mate. :)
I have filled the tube to the top. The coins just fall out once full. If I lift the tube higher sometimes they go to the overflow but mostly they just stack up vertically and jam the mechanism up. :(
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Bingolett..... help please!

Post by badpenny »

Sounds like you're on the right track then.
I'd have a shufty at my Prazisa and Duomat as I think they have the same operation, but I've got a bit of a fuzzy head today. Think I must have had a stale packet of crisps last night.

Looking back at the video you posted I now review my opinion again.

I agree the tube needs to be at the top otherwise there is a big gap and the coins will fall out, but what happens at the other end, surely the gap is merely transferred to there?
I really can't see the purpose of that pin and wire arrangement, all it appears to be capable of doing with a bit of adjustment is to hold the coin above the tube until such time as the cycle moves it out allowing it to drop.
I can't see what controlling that does. If you were to bend the wire as far to the right of the hole it fits in, does the coin stay there or still fall to the right and down the overflow?

I sold my Bingolett a mere 18 years ago, there must be others here who have one and can check theirs? I'm just relying on common sense.
The words Clapham & Common Sense are rarely seen in the same sentence.

BP
widget2k4
Posts: 1385
Joined: Tue Aug 27, 2013 8:32 am
Reaction score: 0

Re: Bingolett..... help please!

Post by widget2k4 »

When I lift the tube up it leaves a gap at the bottom but I can sort that if I got it working. That wire outfit has clearly been added to deflect the coins to the overflow as that's all it can do. The pin part is actually a magnet, so maybe some sort of slug deterrent?
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Bingolett..... help please!

Post by badpenny »

If I were you I'd stop trying to rehash what you've got and simply install a different tube with an overflow outlet half way down it.

Have a look at Mr. P's post Posted: Fri Mar 11, 2011 4:15 pm near the beginning of this thread.
widget2k4
Posts: 1385
Joined: Tue Aug 27, 2013 8:32 am
Reaction score: 0

Re: Bingolett..... help please!

Post by widget2k4 »

Yeah, I think that might be a better idea. :)
User avatar
operator bell
Posts: 580
Joined: Thu Dec 06, 2007 7:30 am
Reaction score: 0
Location: Las Vegas, Nevada

Re: Bingolett..... help please!

Post by operator bell »

Checked my old penny Bingolette. It's slightly different from the one pictured above. There is no long wire dropping down - the eyelets are occupied by a short wire that is probably a weight check. (edit) or a tilt catcher.
1DBL.jpg

The penny pushes arm A, which operates the microswitch, and comes to rest against the plate C, which is pivoted on a screw and spring loaded to the left. The cam B pushes the coin down and forces plate C to the right so that the coin drops. If the tube is full, the coin stays vertical in the mechanism blocking the exit. The next coin in drops past the catch point when pushed by cam B but can't go further, as the previous coin is in the way. As the cam B rotates, it goes down the curve of the left side of the coin and pushes it to the right, into the overflow chute.

My guess is that the machine in question is adapted for a slightly smaller coin than the mech was designed for, so the dimensions and angles are wrong for the way it was originally designed to work.
widget2k4
Posts: 1385
Joined: Tue Aug 27, 2013 8:32 am
Reaction score: 0

Re: Bingolett..... help please!

Post by widget2k4 »

Ah, it actually makes a lot of sense now it's been pointed out,
Thank you.
glittering-prize67
Posts: 263
Joined: Mon Jun 26, 2006 8:00 am
Reaction score: 0
Location: nottingham

Re: Bingolett..... help please!

Post by glittering-prize67 »

I've had my my Bingolette since 1999. Got it from Pennymachines and restored it. I still have it and it's always been my favourite. I just love the game and the look of it. My other half's sister's kids have given this some hammer over the years but grown up now. It's never let me down and still looks superb and original inside.
thomas911
Posts: 7
Joined: Thu Nov 21, 2019 11:46 am
Reaction score: 0

Re: Bingolett..... help please!

Post by thomas911 »

Hi all,
New to this group and also the Bingolett slots. Is there anyone that repairs them around London area does anyone know? Also should the first 6 contacts at the top of the machine move something, ie relays or something? The contacts that are each wired work the lights, payout, spinning main motor, etc. etc., but the first lot that are only connected by one wire and then linked over don’t seem to do anything when pushed. I don’t have a pic to hand but the relay to the left of the payout, the one on its own, seems to stick itself to the relay when switched on. Is that normal? !!COOEE!! ?

Many thanks
User avatar
operator bell
Posts: 580
Joined: Thu Dec 06, 2007 7:30 am
Reaction score: 0
Location: Las Vegas, Nevada

Re: Bingolett..... help please!

Post by operator bell »

Does your Bingolette not have a circuit diagram inside? Here, I'll post one for you in German I'm afraid. The six contacts at the end work the payout solenoid, as you should be able to follow from the diagram. The relay that self-sticks is the anti-cheat relay, aka the tilt relay. There's very little to go wrong. I replaced all the rubbers on mine and reversed a showman mod that made its payout tighter and it works perfectly.
Attachments
bingolet.pdf
(287.59 KiB) Downloaded 300 times
cait001
Posts: 348
Joined: Mon Jun 18, 2018 1:33 am
Reaction score: 1
Location: Canada
Contact:

Re: Bingolett..... help please!

Post by cait001 »

I did a write-up about Rialto, and borrowed some of the pics from this thread to show the difference with Bingolet
http://pinballnovice.blogspot.com/2023/ ... wulff.html
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 22 guests