Search found 34 matches

by slotey
Sun Aug 06, 2023 10:36 am
Forum: Questions and Answers
Topic: Jubliee International Flouro Tubes
Replies: 9
Views: 448

Re: Jubliee International Flouro Tubes

Hi Yes send me an email. I will scan and send it to you but has very little info for what you want, just an exploded parts diagram to show what the part # are & only showing four pairs of wires to the fluorescent tubes.
by slotey
Sat Aug 05, 2023 10:37 pm
Forum: Questions and Answers
Topic: Jubliee International Flouro Tubes
Replies: 9
Views: 448

Re: Jubliee International Flouro Tubes

Hi A lock should be easy to source on ebay. Just have to make sure the correct length. I have a Jubilee parts catalogue. It's s 37 pages exploded diagrams and parts list & covers your machine. No measurements for the locks only # 264 short for door and # 266 long for cash drawer. Can scan and ma...
by slotey
Sat Aug 05, 2023 1:34 pm
Forum: Questions and Answers
Topic: Jubliee International Flouro Tubes
Replies: 9
Views: 448

Re: Jubliee International Flouro Tubes

Hi, You measure a tube, T stands for 'tubular', 4, 5, 8 and 12, the diameter in multiples of 1/8 inches, so T5 is 5/8 inches diameter, then length of tube end of pin to end of pin each end. I guess you are measuring the diameter of the tube and not between the two pins on one end cap. A T5 between p...
by slotey
Tue Jul 04, 2023 6:15 pm
Forum: Questions and Answers
Topic: German Veromat slot wiring help needed
Replies: 25
Views: 1468

Re: German Veromat slot wiring help needed

Hi By the looks as soon as the coin switch is made the motor should start , so first thing to look at . I would disconnect the wires to the motor apply mains to the motor as far as I can see motor is 220 volts ,via a trip or small rated fuse and see what happens , if it pops motor faulty depends wha...
by slotey
Mon Jul 03, 2023 1:24 pm
Forum: Questions and Answers
Topic: Bally Money Honey/Super Sonic conversion
Replies: 47
Views: 5778

Re: Bally Money Honey

Hi Not heard of SIDLEEN before but a quick google search several bits of information there so hopes are looking good. Stands a good chance.
by slotey
Sun Jul 02, 2023 6:24 pm
Forum: Questions and Answers
Topic: Bally Money Honey/Super Sonic conversion
Replies: 47
Views: 5778

Re: Bally Money Honey

Hi I can offer one last chance with a site I have also dealt with in the past. Last time was 2019, but they are still trading so worth a try if you are still looking. Locks And Things Was very reasonably priced I thought. You did not say if your lock had a number or manufacturer. If not, very little...
by slotey
Thu Jun 29, 2023 1:31 pm
Forum: Questions and Answers
Topic: Bally Money Honey/Super Sonic conversion
Replies: 47
Views: 5778

Re: Bally Money Honey

Hi I have several Bally machines including a Money Honey. If I have ever needed a key I have found https://www.key2code.co.uk/radial--tubular-keys.html worth a try. The key # should be on one of the barrel flat sides. They can cut the key to this #. I have had success in the past.
by slotey
Sun May 15, 2022 11:24 am
Forum: Questions and Answers
Topic: Bally (Super) Gold Award - maintenance
Replies: 41
Views: 6555

Re: Bally (Super) Gold Award - maintenance

Hi The Bally socket and plug numbers will not help you, as you won't be getting them from Bally. But the numbers are E-574-1A for the socket and E-573-1A for the plug. I have made a few of the jumpers. They help in repairing a Bally no end. You will find it very difficult to fix one in the case - no...
by slotey
Fri May 13, 2022 1:59 pm
Forum: Questions and Answers
Topic: Bally (Super) Gold Award - maintenance
Replies: 41
Views: 6555

Re: Bally (Super) Gold Award - Removal of Belly Glass

Hi I have had this problem a few times. It can be very stubborn. I have always found get it warm with an hair dryer, but not hot. Chances are, a cloth tape has been used to act as a gasket and gone hard and stuck it to the frame. The heat should soften it. Replace with a few layers of p.v.c tape. Sh...
by slotey
Sun Dec 05, 2021 12:02 pm
Forum: Questions and Answers
Topic: Seeking Aristocrat service manual
Replies: 2
Views: 619

Re: Seeking Aristocrat service manual

Hi
There is an Aristocrat service manual in Resources section. May do what you want it for.
by slotey
Mon Mar 15, 2021 12:49 pm
Forum: Questions and Answers
Topic: Weird looking jackpot mechanism & missing jackpot trigger on Mills War Eagle
Replies: 11
Views: 4384

Re: Weird looking jackpot mechanism & missing jackpot trigger on Mills War Eagle

Hi, The posting photo with the missing bolt indicated sure looks like the reserve jackpot door. The shafts no MLB-2746-A , unfortunately Mills list 3 different deflector plates, and 5 different doors, depending on coin and large and small jackpots, so you will have to make a punt. Yes, that is the d...
by slotey
Sun Mar 14, 2021 3:24 pm
Forum: Questions and Answers
Topic: Weird looking jackpot mechanism & missing jackpot trigger on Mills War Eagle
Replies: 11
Views: 4384

Re: Weird looking jackpot mechanism & missing jackpot trigger on Mills War Eagle

Hi, I compared the jackpots and still cannot see any missing parts. Don't forget, there are less parts in the older jackpots compared to the newer type. Do you have a copy of the Mead Owners' Pictorial Guide? If so, on page 105 it shows a line diagram of the jackpot coin path that also shows the jac...
by slotey
Thu Mar 11, 2021 11:20 pm
Forum: Questions and Answers
Topic: Weird looking jackpot mechanism & missing jackpot trigger on Mills War Eagle
Replies: 11
Views: 4384

Re: Weird looking jack pot mechanism and missing jack pot trigger on Mills war Eagle

Hi, happy to help. Looking at the first two images you posted, it still seems that it is all there, unless it is something I cannot see. I have two machines with this type of jack pot, a Roman Head and an Extraordinary, both with skill stops and gold awards. I will have a look within the next few da...
by slotey
Wed Mar 10, 2021 12:56 pm
Forum: Questions and Answers
Topic: Weird looking jackpot mechanism & missing jackpot trigger on Mills War Eagle
Replies: 11
Views: 4384

Re: Weird looking jack pot mechanism and missing jack pot trigger on Mills war Eagle

You have an early type jackpot. As far as I can see, nothing is missing. The reference to a missing stud is incorrect. There never was one. The jackpot was held closed and released by the payout slides. When all the slides were back, the jackpot would be dumped, and when the slides reset, would be c...
by slotey
Wed Jan 20, 2021 1:59 pm
Forum: Questions and Answers
Topic: Sega Bell Hi-top reserve jackpot help
Replies: 5
Views: 2153

Re: Sega Bell Hi-top reserve jackpot help

When I said I have 3 of the Mills, I meant 3 of the reset bars spare. I have about 16 machines using that type of bar.
by slotey
Tue Jan 19, 2021 11:28 pm
Forum: Questions and Answers
Topic: Sega Bell Hi-top reserve jackpot help
Replies: 5
Views: 2153

Re: Sega Bell Hi-top reserve jackpot help

Hi,
I have 3 Mills but a word of warning - all are different heights or bent different, I guess to avoid the payout slides and the height of the coin stack to allow for height variation of 20 coins will vary a lot depending on the coins used.
by slotey
Tue Dec 22, 2020 2:57 pm
Forum: Let's Talk about Slots
Topic: Jennings Governor Intermittent fault
Replies: 5
Views: 2540

Re: Jennings Governor Intermittent fault

You can find a free download for a chief manual http://rwatts.cdyn.com/download/Jenning ... Manual.pdf
not the best but better that nothing
by slotey
Wed Oct 28, 2020 7:05 am
Forum: Open Forum
Topic: Groetchen Pikes Peak
Replies: 5
Views: 2898

Re: Groetchen Pikes Peak

Hi i take any thread i need any info on to a local supplier of fixings /fasteners and ask him , and he always seems to have the answer tries a nut of the tread to confirm then the next question i have do you have any ?
by slotey
Sat Aug 15, 2020 5:49 am
Forum: Questions and Answers
Topic: Jennings Governer Jackpot Assembly
Replies: 3
Views: 2109

Re: Jennings Governer Jackpot Assembly

Hi I am in Birmingham. After you have cleaned it and still have a problem you are welcome to bring it over and compare it to mine. I have two - lot better to have them side by side and spot any differences, even more so if you have a spring in the wrong place. P.M me if help needed.