Search found 418 matches
- Fri Aug 18, 2023 7:49 am
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett Fireworks
And yes it’s a pretty simple design. Before I saw it I was puzzling how they were going to make it step 3 times for a ball in one hole, 2 for another and 1 for some. When I saw it followed the same principle of multiple win allwins it became very obvious and I felt pretty stupid for not guessing giv...
- Thu Aug 17, 2023 9:59 pm
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett Fireworks
Cheers. Will message you my contact details.
- Thu Aug 17, 2023 5:05 pm
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett Fireworks
So for this of interest to its now working! For those interested in what needed doing … The transformer had a dodgy primary winding with a break in the internal wire. Pressing it made it work or not. I changed it for an 8A 6-0-6v one and used 12v for the solenoid circuit and 6v for the bulbs. The sw...
- Sun Aug 06, 2023 11:27 pm
- Forum: Open Forum
- Topic: Jezzard Tap a Coin
- Replies: 15
- Views: 1416
Re: Jezzard Tap a Coin
There doesn't look to be too much to it. Personally, I'd try to sketch a rough circuit diagram by tracing the wires. Then you might get an idea of what's meant to do what. Maybe that's just the way I think though!
- Sun Aug 06, 2023 8:00 am
- Forum: Open Forum
- Topic: Jezzard Tap a Coin
- Replies: 15
- Views: 1416
Re: Jezzard Tap a Coin
As above, diodes are used to allow electron flow in one direction only. Strange one appears to have been cut out. They can also be used to prevent a back current surge when a coil activates, although that’s generally to prevent components being damaged where semiconductors are present such as solid ...
- Sat Aug 05, 2023 9:13 pm
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett Fireworks
It did cross my mind to change to 12v throughout but ordered 6v bulbs now and the transformer has a 6v tap anyway so no more work really. I am replacing the 2 mains lamps with 12v led boat lamps though - the idea of one of the solenoids switching mains on one of the flimsy switches makes me nervous!
- Sat Aug 05, 2023 2:09 pm
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett Fireworks
Thanks. That confirms what I thought. I suspect it’s a 6 0 6v transformer. 12v for the solenoids and 6v for bulbs. I’ll order a transformer and give that a whirl. Cheers
- Sat Aug 05, 2023 9:31 am
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett Fireworks
I managed to find the missing part in a bag of bits - result! Next question. The transformer is dead on this one, broken winding on the mains side making it intermittent and potentially nasty. Does anyone know the voltage this works at? When I momentarily got this one to work it was putting out abou...
- Fri Aug 04, 2023 1:18 pm
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett Fireworks
Ah that’s perfect. Thanks. I noticed the slotted bit underneath but wasn’t sure what shaped part fitted into it. Now to make one…..!
- Fri Aug 04, 2023 9:57 am
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett Fireworks
Delivery received! All the switches and electrics are a bit of mess. Compared to a pinball machine it’s pretty simple stuff however so should be able to sort all that pretty easily. However, after a quick look there’s a bit missing from the mech. There’s nothing connected to the device that releases...
- Wed Jul 19, 2023 6:53 am
- Forum: Questions and Answers
- Topic: Bally Money Honey/Super Sonic conversion
- Replies: 47
- Views: 5856
Re: Bally Money Honey
I’m guessing that may well stop it paying out.
- Sun Jul 16, 2023 5:14 pm
- Forum: Questions and Answers
- Topic: Bally Money Honey/Super Sonic conversion
- Replies: 47
- Views: 5856
Re: Bally money honey
Yes it should have an arm which will make contact between the inside ring and one or more of the outside studs. Looking in the manual I have this must be a very late model - all the steppers in the manual are the 'pinball' type solenoid steppers which I'm more familiar with. I'm not familiar wit thi...
- Wed Jul 12, 2023 8:41 pm
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Re: Stevenson and Lovett fireworks
Fair enough. Am looking forward to having a play!
- Wed Jul 12, 2023 8:04 pm
- Forum: Questions and Answers
- Topic: Stevenson and Lovett Fireworks
- Replies: 57
- Views: 21470
Stevenson and Lovett Fireworks
Topic merged - Site Admin. I’m being sent one of these by someone (not sure if they are a member or not) in the hope that I’ll fix up the electrics to get it working again. Apparently he’d previously given it someone many of us hold dear - ‘Fencing’ of EBay fame! The one who caused the download pro...
- Wed Jul 12, 2023 7:55 pm
- Forum: Questions and Answers
- Topic: German Veromat slot wiring help needed
- Replies: 25
- Views: 1468
Re: German Veromat slot wiring help needed
Well I certainly don’t claim to be an ‘expert’, but I’ve fixed quite a lot of EM pinball machines in the past so can usually find my way around EM machines. It’s not always that easy ‘remotely’ however. If anyone has any EM stuff they need sorting I’m happy to consider it at reasonable rates. Just m...
- Fri Jul 07, 2023 9:46 pm
- Forum: Let's Talk about Slots
- Topic: Rotamints
- Replies: 212
- Views: 51648
Re: Rotamints
As above. What fire the label in the grey box say? Suspecting this might be a convertor too.
- Tue Jul 04, 2023 12:18 pm
- Forum: Questions and Answers
- Topic: Each Way Oliver Whales slot restore
- Replies: 16
- Views: 1249
Re: Each way oliver whales slot restore
I think these backflashes were printed directly onto the plastic. You could replace by doing it the way Wondermatics did on their machines. I.e. scan and tidy the backflash on a computer and print onto thick card, then lay a 500 micron clear acetate sheet over the top before putting the hardware bac...
- Tue Jul 04, 2023 12:13 pm
- Forum: Questions and Answers
- Topic: German Veromat slot wiring help needed
- Replies: 25
- Views: 1468
Re: German Veromat slot wiring help needed
No worked on this particular machine before but lots of pinballs. It is trickier without a schematic. Does the fuse blow as soon as the coin goes in or later after it’s activate the score motor? If the switches are gapped correctly and the tags where the wires join them are bent onto one another the...
- Fri Jun 09, 2023 8:20 pm
- Forum: Let's Talk about Slots
- Topic: Big Broadcast pinball
- Replies: 5
- Views: 664
Re: Big Broadcast Pinball
Very nice!
- Wed May 24, 2023 3:57 pm
- Forum: Let's Talk about Slots
- Topic: Rotamints
- Replies: 212
- Views: 51648
Re: Rotamints
I can’t imagine it will draw 1000w. Or at least if it does then it probably is about to burn your house down. As above, I usually check the basics and if all OK plug it in while watching for any nasty things happening.