FORUM

... a couple of points. 1. You said that my Dog And Anvil are clearly misaligned. Can you please advise how it should ...

... a couple of points. 1. You said that my Dog And Anvil are clearly misaligned. Can you please advise how it should ...

... have scared me a little about adjusting the dog and anvil. 😊 I have created a small video showing what the machine is ...

I think somebody has been fiddling around and mended it until it was broken. Here is your Dog and Anvil which are clearly misaligned. 45B6CADD-0B02-4861-B082-266F1DD3BDBCa.jpg ...

Obviously the handle needs to go all the way down past the pinion on the right (called dog and anvil) which releases all the parts that activate the machine, including ...

... 88255F10-F5BF-40D4-AFF7-E51B9BCD5595.jpeg 3) dog and anvil. If you move the anvil to the left by undoing the nut on top, ...

... again for your patience treefrog! With the handle cocked ready to release the timing bar I can ... are activated. I see from various posts about dog and anvil, if that is the answer, it isn't something to tinker ...

... initial start of the first reel stop with the dog and anvil, by extending the play and pushing the bar further.

... allowing the lower fingers to push out in time and no payout. If this is the case, it is a timing ... and can be adjusted with small movement of the dog and anvil. There is a topic on this .

I don't know Paul, I've recently worked on two bandits (one Poinsettia and one Ozzie) that were ... return against the pump and not allowing the anvil to get past before running out of momentum. ... guiding the uninitiated towards attacking the Dog & Anvil without a safety net. There's plenty ...

... back from the discs? If not, first check the Dog and Anvil adjustment (https://www.pennymachines.co.uk/Forum/search.php?keywords=Dog+and+Anvil) ...

... one thing we didn't want to fiddle with. It's Dog & Anvil time!! There's a lot written about it on here. If ... read up on it, because if you don't fully understand/follow the instructions you'll be back here telling ...

... first upload it to a host site like Youtube, and then post a link to it here. I'm guessing your ... their drop when released or if "The dog & anvil" needs adjusting to let the bar push in to its ...

Hello,
I've adjusted the dog and anvil ,which sounds like a pub name ! all now seems to be working O.K. the pull now needed is about 15 lbs which is much less than before, the reels spin O.K. and it pays out.
Many thanks from Neale.

... it only needs to be extended a fraction, and what you describe happens. If you push it the ... Once you've reached that point check the Dog and Anvil it should be ready to tip. If it still has more movement ...

Hi Neale Hearty congratulations on your novel and unique question. This must be without doubt ... is if you extended the reach between the Dog and Anvil. It would only need to be millimetres to cause that ...

badpenny wrote: ↑Sat Aug 25, 2018 3:51 pm Your photo is of the dog and anvil.

BP

Is the dog piece upside down? Either it is or mine is! I thought the longest part was at the bottom.

If this was my machine and my problem I'd check the suspects I've previously ... intending to PM The OP and see if he'd checked the Dog & Anvil as it also has a direct action on when the cycle fires, ...

... the other. Anyway, if you stop pulling the handle a fraction before the dog and anvil trip over is the bar not far enough forward to lift the legs ...

... had a Sega Victory back in the early 90s. The handle release on mine was electric as well. The ... that activates a solenoid that acts on the Dog & Anvil releasing it to play. If I remember the pay out was ...