FORUM

Any opinions on this "redraw" for the top glass?

As it turned out, upon closer inspection and getting into it more. A few holes had been rethreaded for American threads. So, I just went ahead and "adjusted" the others.

THANK YOU!

Oh, any idea about the power consumption (amps or watts @ 230v) of the existing solenoid?

I'm trying to keep things as original as possible. I know I could always go with slightly larger screws and re-thread things...but I'd rather not. New plan for the solenoid. I should be able to fit a small Step-Up transformer inside the game and use the original solenoid. One important question thou...

Every time I get into anything "international", I learn more and more about how ignorant Americans are... I had no idea there was anything besides metric and SAE. I wonder if I'm going to be able to find these over here. I have a couple of good places to look though. THANK YOU!

Things are moving along. Refinished the cabinet and replaced the back panel. Got everything, sans mechanism, polished and installed. Working on the mechanism now. Got lucky and found three brackets (with the wrong switches) and three switches that will work in a box of old pinball parts. Bit of a jo...

I'm actually considering using a 24v flipper assembly from a pinball machine (and a transformer). It should have a long enough stroke to work...just not sure if it'll be strong enough.

OK, fixed my original post and the pictures. THANK YOU...somehow I overlooked the upload file link. The slide is there. I for some reason thought there were interchangeable slides to push out a different number of coins. With US 50c coin, it pushes out 1 coin at a time. I think I can make a slight m...

I think it's also missing the "payout slides".

Agreed on my pictures not posting well. Can you advise on the proper way to post them? I created an album on this site and tried various ways of displaying them. A US 50c is 30.6 mm in diameter (US 25c is 24.26 mm and seem to be too small as it falls out of the side of the coin shoot). I believe the...

Thank you! Well, I just picked up an Allwin FlashWin. It's in rather bad condition, missing I believe a large number of parts. I'd like to get it working and restore it to the best of my abilities. I'm mostly a pinball collector (both EM and SS) with a few other vintage arcade games. Hopefully I'm n...

Hello to you both! I just picked up an Allwin Flash Win here in the states. It's in pretty bad shape and I'm suspecting it's missing a lot of mechanical parts. I know the micro switches are gone, but I'm not sure what else. Might either of you still be around and willing to assist with some pictures...