Sega Bell

[dutchboy]

Morning everyone.
I did buy yesterday this Sega Bell in a weak moment. The price was only about 40 pounds. It is missing the escalator, coin tube and overflow. Do you think that the parts will be easy available? If so, then I will put an advert in the Market. The mech is Mills, I think, playing on old penny. There's a a stamp on the frame saying FOK. There were e few coins, even one from 1903 in the cashbox. I'm not an engineer and learning by just starting the job, so any advice is welcome. If needed, I will post some more pictures for details.
Thanks, dutchboy.

[badpenny]

You did well there for £40 ... chances are the cash box is worth that.
As to whether it's Sega or Mills, purists can get twitchy, I don't. As a child working in my Uncle's arcade we'd pull all the mechs out of the cases at the end of the season, spend Winter oiling and fiddling the payouts before shoving them back into whichever case was closest.

I'm sure you know Mills and Sega are interchangeable.
You say it's on old Penny. Then it's unlikely to have had a JP, an escalator? perhaps, but again rare.
It was probably converted over here, escalators modified to take something as big as an old penny are rare to find let alone make or bodge.

Likewise JPs tend to get jammed if you try to feed them old pennies.
In most cases the tin work inside to transport coins from entry to mech (incorporating a slug detector) would likely to have been soldered up in the back of the arcade (my Uncle's job).
The payout tube is easily made from tubing with the same internal diameter as 1d.
The overflow tube is another soldering jobby. I may have one behind the clock on the mantelpiece.
The slides look ok from your photo?

The escalator window would often have a bit of mirror shoved in it and the JP window would sport some garish notice falsely claiming obscene amounts of money for an impossible combination on the winning line.

However if you're going the purist route, well then it's a totally different job, plus you've got the Sega-V-Mills issue.
Could get expensive, not to mention fiddly.

BP

[dutchboy]

Many thanks for the quick response and info bp! The window for the escalator has no mirror but glass so that's why i was thinking that it's used one. I hope the slides are ok because i dont know in which order they must be placed. I'm learning all the time, even the english language. Sometimes i need google to translate. Now i have to run to work and want to put an advert in the market maybe this evening.
Thanks again, dutchboy

[badpenny]

Hi ... As I said " As a child working in my Uncle's arcade we'd pull all the mechs out of the cases at the end of the season, spend Winter oiling and fiddling the payouts before shoving them back into whichever case was closest."

So you're probably looking at a mechanism and a case that didn't live together originally. I was describing what we would do to get a machine earning money, often using what we had available.
I would suspect you've bought somebody's failed project .... failed when they realised the issues you're facing now.

BP

[aristomatic]

The Sega version supplied in England on old penny would usually have looked something like this......

with a Copper Sega name-badge due to old pennies.
You can see the move-along escalator in the pictures.
As BP says, it's hard to source and expensive to buy. As major parts you have already were not expensive at £40, it makes the buying of replacement original parts a more acceptable/sensible option.

[dutchboy]

Badpenny/aristomatic, that would be something that escalator. It looks great! I will try in the market, if not than maybe an alternative tube? Badpenny, interesting that soldered overflow behind that mantelpiece. (I will put it also in the market)
No sir, it wasn't a failled project. The older people who owned it were moving and owned it for about 35 years. The lady told me if the machine was stuck she throws some coca cola over the mech till it will work again
Now i'm start working at the advert.

Greetings!

[badpenny]

Coca Cola might be the cause of the problem.
I once saw inside an electronic AWP that had been given a generous slug of Coke.
It looked like liquid rubber had been spilt all over it.

[badpenny]

Actually ..... I just realised dutchboy might not be helped by my chuntering in colloquial English as he mentioned sometimes using Google to translate.
So I've just taken my post above and translated it into Dutch, then to make sure it was still accurate I translated it back into English .......

Coca - Cola causal problem .
I saw that there -zelaia Royale Coca - Cola E get AWP .
To fluidal rubber stuffed , when they went to view it sloppiness .

So ...... I'm glad we sorted that one out and no mistake.

BP

[treefrog]

You are highly unlikely to get an escalator like the one Aristocrat has shown, as it's rare and in demand. There are lots of the roll-down escalators available, often on ebay, but one was sold by our "slottie" spares seller from Norfolk - Roger. Well in fact it didn't get a bid at £5, so if you're happy with that type, they are cheap and work well.

A mechanism like yours sold at the Elephant sale yesterday for £45, so you got a bargain. Not sure if Roger's contact details are on this site, but I know they are in the MMM magazine. He will have all the parts. you need, in fact I suspect he will have the same parts in this weekend auction at Coventry.

The other part that is tough to get and will cost, if it did not come with the machine, is the back door.

[aristomatic]

A word of warning too... just because an escalator is advertised as English old penny, it doesn't mean that it will 100% fit your casting set, without it requiring some change to the coin entry positioning, see pictures.

The one at the bottom would fit your top front (Sega) casting. The top one is off US Mills Hitop & coin entry position is different.

GP