Somebody knows... Maybe you?
User avatar
radiochrissie
Posts: 194
Joined: Sun Oct 10, 2010 7:03 pm
Location: The Iron Men
Contact:

Re: Sega Windsor slot

Postby radiochrissie » Mon Sep 11, 2017 5:51 pm

Oh yes, I think 'capacitive coupling' rather than 'resistive short' would be my explanation. !!ESCAPE!!

User avatar
coppinpr
Posts: 4091
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Sega Windsor slot

Postby coppinpr » Mon Sep 11, 2017 6:39 pm

I like a bit of "captive coupling" on the right day !OMFG! :cool:

youngerap
Posts: 317
Joined: Sat Sep 08, 2012 11:10 pm

Re: Sega Windsor slot

Postby youngerap » Mon Sep 11, 2017 8:26 pm

coppinpr wrote:
Mon Sep 11, 2017 6:39 pm
I like a bit of "captive coupling" on the right day !OMFG! :cool:
Is that not just another name for 'marriage'?

By the way, I have absolutely no knowledge of the electrickery stuff, so am unable to provide constructive comment. My apologies to radiochrissie. I hope you find the part you need.

bod
Posts: 52
Joined: Sat Jan 17, 2015 7:17 pm

Re: Sega Windsor slot

Postby bod » Mon Sep 11, 2017 10:36 pm

I think it is called 'bad luck' BP.
Could the insulation have split or chafed around the retaining clip perhaps? Switch it on and run your tongue along the wires. I'm sure if there is a fault you will soon find it. :!:
(Capacitive coupling wouldn't provide the power - the solenoid would soon drain it)

User avatar
radiochrissie
Posts: 194
Joined: Sun Oct 10, 2010 7:03 pm
Location: The Iron Men
Contact:

Re: Sega Windsor slot

Postby radiochrissie » Tue Sep 12, 2017 4:08 pm

Good god, All I can taste now is metal, it certainly cleans your tongue up :!:
As I have said previously, my solenoid is no more, it has ceased to be, all I need is someone to help me find a replacement or give me the part number that is written on the coil sleeve. |/XX\|

User avatar
radiochrissie
Posts: 194
Joined: Sun Oct 10, 2010 7:03 pm
Location: The Iron Men
Contact:

Re: Sega Windsor slot

Postby radiochrissie » Sat Oct 07, 2017 12:59 pm

Sega Windsor now fixed !
As I was not able to ascertain the correct solenoid I made my own :cool:
The original solenoid coil had gone short circuit due to overheating and measured just 0.4 ohms, to find out the correct resistance I carefully unwound the coil, which was 77 metres in length. I then measures the resistance which was approx 12 ohms.
The dropper resistor in the machine,which is in line with the solenoid coil, was measured at 24 ohms.
I now know the total resistance across the 30v supply is 36 ohms so using ohms law i know that the current in this circuit is 833 mA. Then using V=IxR I know that the voltage across the solenoid coil is 10v. So I then obtained some 26 swg enamelled copper wire and rewound the coil using approx 77 metres. When I measured the rewound coil it was about 11 ohms !SMARTY! Here is a picture of the new working coil.
B0B37D24-76AB-4CF4-8AC5-AEEDBB25B237a.jpg
B0B37D24-76AB-4CF4-8AC5-AEEDBB25B237a.jpg (7.34 KiB) Viewed 2105 times
C0C76C26-5EE0-4089-B7B1-2F09C6A67053a.jpg

aristomatic
Posts: 865
Joined: Thu Sep 10, 2009 8:13 pm

Re: Sega Windsor slot

Postby aristomatic » Sat Oct 07, 2017 2:04 pm

Well I understood completely the whole of the

.......................................... first line....................!

As for the rest, well done (whatever you did......)

User avatar
coppinpr
Posts: 4091
Joined: Sun Oct 10, 2010 2:01 pm
Location: Lewes, East Sussex
Contact:

Re: Sega Windsor slot

Postby coppinpr » Sat Oct 07, 2017 8:57 pm

and you did it all with the machine upside down !!IDEA!!
Images now flipped - Site Admin.

User avatar
badpenny
Forum Moderator
Posts: 6389
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Sega Windsor slot

Postby badpenny » Sat Oct 07, 2017 10:12 pm

!!YIPPEE!! !!THUMBSX2!!

13rebel
Posts: 505
Joined: Tue Nov 03, 2009 4:03 pm

Re: Sega Windsor slot

Postby 13rebel » Sat Oct 07, 2017 10:22 pm

I beat you Aristo....I managed one and a half lines and the v= i x r bit from physics lessons 100 years ago. Well done Radiochrissie on a great result,enjoy.


Who is online

Users browsing this forum: No registered users and 19 guests