Somebody knows... Maybe you?
User avatar
special when lit
Posts: 291
Joined: Fri Dec 17, 2004 4:46 pm
Location: Derby

Re: Decorative edge trim for an Exacta

Postby special when lit » Sat Sep 19, 2020 12:39 pm

Thanks.

stoxman22
Posts: 77
Joined: Tue Dec 06, 2005 10:18 am
Location: Cheshire

Re: Decorative edge trim for an Exacta

Postby stoxman22 » Fri Oct 09, 2020 1:23 pm

I found some edge trim that I was thinking of on eBay. Not cheap at £13 a meter but it's going to look great I think.
IMG_20201009_141856643a.jpg
IMG_20201009_141759779a.jpg

stoxman22
Posts: 77
Joined: Tue Dec 06, 2005 10:18 am
Location: Cheshire

Re: Decorative edge trim for an Exacta

Postby stoxman22 » Thu Oct 29, 2020 5:40 pm

So finally I have finished my Exacta with the new case I have made. I am quite pleased with it as wood work is not my first skill. I think the trim looks great. It took ages to put on as the corners would cause the bit before and after to lift so had to clamp the strip down as I fitted it.
Exactaa.jpg

highfield
Posts: 109
Joined: Mon Apr 08, 2013 9:23 pm

Re: Decorative edge trim for an Exacta

Postby highfield » Thu Oct 29, 2020 5:58 pm

Fantastic job. Well done **xXx**

User avatar
treefrog
Posts: 3798
Joined: Mon Sep 29, 2008 2:46 pm
Location: Suffolk

Re: Decorative edge trim for an Exacta

Postby treefrog » Thu Oct 29, 2020 6:34 pm

Super work Stoxman, the Gunter Wulff returns !!THUMBSX2!!

User avatar
badpenny
Forum Moderator
Posts: 6386
Joined: Thu May 05, 2005 12:41 pm
Location: East Midlands
Contact:

Re: Decorative edge trim for an Exacta

Postby badpenny » Thu Oct 29, 2020 9:07 pm

Nice work that, well done.
I have a very soft spot for Günter Wulff mechanical machines, they're like the Cinderella of my era.
Yet the mechanics are beyond compare when it comes to design.


Who is online

Users browsing this forum: No registered users and 13 guests