Feedback required...

Comment on this site; suggest improvements; be firm but polite.
User avatar
wembleylion
Posts: 184
Joined: Wed Oct 30, 2013 8:07 pm
Reaction score: 2
Location: Norfolk UK

Re: Feedback required...

Post by wembleylion »

Yep, I can see the form and all the links work.

John
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Feedback required...

Post by badpenny »

Same as TF using laptop on Microsoft Explorer
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Feedback required...

Post by pennymachines »

OK, thanks all. !THUMBS!
youngerap
Posts: 319
Joined: Sat Sep 08, 2012 11:10 pm
Reaction score: 0

Re: Feedback required...

Post by youngerap »

I see the form and no error message, PM. I am running firefox on a windows 10 box, if that helps
13rebel
Posts: 588
Joined: Tue Nov 03, 2009 4:03 pm
Reaction score: 0

Re: Feedback required...

Post by 13rebel »

Same as TF
User avatar
JC
Posts: 1082
Joined: Sun Feb 19, 2006 10:38 pm
Reaction score: 9
Location: Kent
Contact:

Re: Feedback required...

Post by JC »

I'm getting the error page - viewed on chrome on a PC (windows 8.1)
User avatar
geordy55
Posts: 283
Joined: Wed Apr 19, 2017 8:33 am
Reaction score: 0

Re: Feedback required...

Post by geordy55 »

Maybe a good idea to say what we’re using. I get the error page on my I pad using safari.
User avatar
dutchboy
Posts: 415
Joined: Sun Oct 19, 2014 8:28 pm
Reaction score: 0
Location: Netherlands

Re: Feedback required...

Post by dutchboy »

I see a form with ipad and safari
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Feedback required...

Post by badpenny »

My Kenwood toaster isn't accepting normal size bread, this means I have to turn the bread halfway through. This leaves me with a black stripe across the middle.
It's on the Work Top and I was on Nitrazepam but have now switched to wood alcohol and Toilet Duck.
User avatar
treefrog
Posts: 4813
Joined: Mon Sep 29, 2008 2:46 pm
Reaction score: 31
Location: Suffolk

Re: Feedback required...

Post by treefrog »

Answer: buy small loafs or do what I do, put a knife through the toast to support high for a perfect finish.... |/XX\|
speedwell
Posts: 108
Joined: Sat Jan 17, 2009 2:16 pm
Reaction score: 0

Re: Feedback required...

Post by speedwell »

Well BP that did make me laugh!! I was going to say keep it up but there again.....
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Feedback required...

Post by badpenny »

I have given some thought to this problem, and whereas TF's suggestion is a goer I find the weight of the fork tears the bread, making spreading butter an unpredictable art.
Further research has shown the following photo seems a reliable solution without the need for forms or error messages.
Attachments
WP_20171218_13_09_20_Pro.jpg
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Feedback required...

Post by badpenny »

....... Further to my post above, do not under any circumstance use a plastic peg to hold the toast in position.

The heat will liquefy the peg allowing it drip down into the red hot elements.
The cost of redecorating the kitchen is obscene and in this cold weather opening the windows to chase the dark smuts and acrid smell away is not a choice decision. Criticism and condemnation may well fly your way, but worst of all the toast is inedible.
Perhaps a fork ......
bosmod
Posts: 5
Joined: Mon Dec 04, 2017 7:11 pm
Reaction score: 0

Re: Feedback required...

Post by bosmod »

I see a form as well.
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Feedback required...

Post by pennymachines »

Thanks bosmod. Everyone should see the form now. I've homed in on the cause of the problem and fixed it (for now).
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests