Rainbo, Arc en Ciel, Spry Ball - pinballs

Show us what you found. Make us jealous!
Post Reply
Guest
Posts: 23
Joined: Fri Jul 15, 2011 11:05 pm
Reaction score: 0

Rainbo, Arc en Ciel, Spry-Ball, Tura-Ball pinballs

Post by Guest »

Win-A-Gum & Arc en Ciel
Attachments
WRFG.jpg
arc-en-ciel.jpg
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Rainbo, Arc en Ciel, Spry Ball - pinballs

Post by badpenny »

If my Spanish holds up arc en ciel means arch in the heaven/sky so I guess that's a rainbow? :???:
User avatar
JC
Posts: 1082
Joined: Sun Feb 19, 2006 10:38 pm
Reaction score: 9
Location: Kent
Contact:

Post by JC »

Hello Lee

I guess you're refering to two machines on ebay at the moment. The Arc en Ciel is an early example of what would evolve into what we now know as pinball. My knowledge of these machines is vague, so I'll leave that to someone else.

The Rowntree's Fruit Gum is an Oliver Whales allwin dating from sometime in the mid fifties, and this type of machine would have been popular in arcades right through the 1960s. The vendor dates it as c1940, which is incorrect. Caution is required with some descriptions of machines on ebay, which can range from slightly inaccurate to damn right wrong! In fairness, (with the exception of the date) the vendor has not misrepresented this particular machine, and has added a note that he believes it to be original. As for as I can see from the pictures, it would appear to be entirely original, and in quite good condition.

Hope this has helped

Jerry :D
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Post by badpenny »

AH.......... French eh? I stand corrupted. My language teacher always said I was fluent in gibberish!
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Post by pennymachines »

Arc en Ciel (arc in the sky) is a version of the 1932 Rainbo pintable by Keeney and Sons of Chicago, probably made the same year, possibly by (or under licence to) Keeney for the French market.

The bold, colourful playfield with it's simple layout and the absence of integral legs is typical of a "first generation" pinball. By 1933 legs were standard and playfield features were becoming more sophisticated.

It's much earlier than the Rowntree's Fruit Gum, arguably more interesting and rarer (although made in far greater numbers originally) but would normally sell for rather less. Collectors tend to prefer payout or prize-giving games that don't take so much floor space.
junior
Posts: 177
Joined: Sat Sep 20, 2014 7:33 pm
Reaction score: 0

Spry-Ball pinball

Post by junior »

Topic merged - Site Admin.

Hi, I came across this Spry Ball today. I would be grateful for any information on this machine. It doesn't work. Can you tell me what's missing, age? It's on 1d, Midland Components, Ltd., Coventry, Patents Pending - that's all I've got. Help !PUZZLED!
widget2k4
Posts: 1385
Joined: Tue Aug 27, 2013 8:32 am
Reaction score: 0

Re: SPRY-BALL pin ball

Post by widget2k4 »

No picture?
junior
Posts: 177
Joined: Sat Sep 20, 2014 7:33 pm
Reaction score: 0

Re: SPRY-BALL pin ball

Post by junior »

That would help,
Attachments
IMG_0427a.jpg
IMG_0426a.jpg
IMG_0425a.jpg
IMG_0424a.jpg
IMG_0423a.jpg
IMG_0422a.jpg
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Spry-Ball pinball

Post by pennymachines »

Here's the IPDB page:
Made 1933... 10 balls for 1 English penny. The game pictured here is missing its legs and a stick of wood was later attached to the cabinet bottom to provide playfield slant. The cabinet measures 32 inches long (not including the ball plunger assembly), 20 inches wide, and 14 inches high at the front end.
It appears to be a British clone of Keeney & Son's very popular Rainbo pinball of 1932, with exactly the same playfield layout. I used to have a different British clone of this game, which even imitated Rainbo's paintwork.
junior
Posts: 177
Joined: Sat Sep 20, 2014 7:33 pm
Reaction score: 0

Re: Spry-Ball pinball

Post by junior »

Spry-Ball is now working. Only 6 balls not 10. Thanks for information.
briggal1
Posts: 1
Joined: Tue Apr 09, 2019 5:47 pm
Reaction score: 0

Re: Spry-Ball pinball

Post by briggal1 »

Hi

Do you have any photos of the mechanism to explain how this works?

I like building replicas and this would be a great machine to replicate for my grandchildren.

Any photos and info you could provide would be greatly appreciated.

Thanks
slotey
Posts: 34
Joined: Wed Jul 13, 2011 7:13 am
Reaction score: 0

Re: Spry-Ball pinball

Post by slotey »

Strange, an identical machine was on the repair shop yesterday. You wait for ages, then two turn up.
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Spry-Ball pinball

Post by pennymachines »

briggal1 wrote: Tue Apr 09, 2019 5:51 pm Do you have any photos of the mechanism to explain how this works?
These are quite simple, the most complex bit being the ball lift mechanism. There is a nice video showing an isolated mechanism in detail here: Fun with Pinball
See Ball Lift (Requires Flash Player)


ball-lift.gif

The other part is releasing all the balls upon insertion of a coin. The easiest (and usual) way to achieve this is with an Essex (or similar) coin acceptor. This device will allow the player to push the lower ball trap to the open position (against a spring) upon insertion of a suitable coin.
Attachments
coin-acceptor.jpg
coin-acceptor.jpg (11.86 KiB) Viewed 11347 times
cait001
Posts: 348
Joined: Mon Jun 18, 2018 1:33 am
Reaction score: 1
Location: Canada
Contact:

Re: Spry-Ball pinball

Post by cait001 »

These are the most basic of coin-operated bagatelles with countless variants and bootleg versions. They can be had rather cheaply, but also are fun things to try and build oneself, whether with nails on a board or with Lego or other construction toys.
User avatar
bryans fan
Posts: 822
Joined: Mon Feb 03, 2003 10:15 pm
Reaction score: 7
Location: Somerset

Re: Spry-Ball pinball

Post by bryans fan »

I recently obtained this flyer, thanks to sweetmeats, and thought the owner of the Spry Ball would appreciate having a copy: Spry-Ball pinball flyer
User avatar
coppinpr
Posts: 5111
Joined: Sun Oct 10, 2010 2:01 pm
Reaction score: 20
Location: Lewes, East Sussex
Contact:

Re: Spry-Ball pinball

Post by coppinpr »

I do like the telegrams address on the flyer "Dazzlers".
A cleverly written flyer, "yours for £5, less than one week's takings". Well yes, but only if you buy on HP, and you would still owe £12! But the best part is, "reports of takings of £7 to £8 per week". Well, that's over 1,900 games per week (274 per day if the venue is open 7 days a week). Let's say a 10 ball games takes 5 mins; that's continuous uninterrupted play for over 22 hours per day. Let's be generous and say a game only takes 3 mins. If the venue is open 11 hours per day that would mean the players would be queuing up when the place opens and forced to leave when it closed. With 10 balls per game 7 million balls would be propelled per year; the machine would be worn out before you finished the HP agreement. :lol:
User avatar
arrgee
Posts: 1589
Joined: Thu Feb 08, 2007 11:56 am
Reaction score: 5
Location: North Wiltshire

Re: Spry-Ball pinball

Post by arrgee »

sloty wrote:Strange, an identical machine was on the repair shop yesterday, you wait for ages, then two turn up.


A few pics of the Spry-Ball pin ball that was shown again recently, nice little machine, the owner said it had been in her family since the late 1930s and it came from Brighton Pier. I did notice an 'F J' stencilled out of the wood internally, and wondered if this had anything to do with the manufacturer - pics are not good quality as they were screen shots from the TV
Attachments
DSC_1707.JPG
DSC_1708.JPG
DSC_1709.JPG
DSC_1710.JPG
DSC_1712.JPG
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Rainbo, Arc en Ciel, Spry Ball - pinballs

Post by pennymachines »

German Rainbo clone by CM Schwarz: Tura-Ball
Attachments
tb.jpg
Post Reply

Who is online

Users browsing this forum: No registered users and 15 guests