Bell-Fruit Manufacturing Co. bandits

American, British, French or German? We want to know about it.
highfield
Posts: 195
Joined: Mon Apr 08, 2013 9:23 pm
Reaction score: 1

Re: Bell-Fruit Manufacturing Co. bandits

Post by highfield »

Great memories of times spent with your dad.
industrialmuseum
Posts: 1
Joined: Thu Mar 03, 2022 3:10 pm
Reaction score: 0

Bell Fruit – was this manufactured in Nottingham?

Post by industrialmuseum »

Hi,
I represent Nottingham Industrial Museum.
We are trying to acquire a Bell Fruit machine manufactured in Nottingham at the recently closed Leen Gate factory. I wonder if someone could confirm the manufacturing location of this machine?
https://pin.it/2wE6rZH
The vendor has sent me an additional picture which indicated the model is 7-T Bell Fruit Serial No. 602419.
Help appreciated!
Attachments
777-1.jpg
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Bell-Fruit Manufacturing Co. bandits

Post by pennymachines »

Yes, I believe that bandit was made at the Leen Gate factory. As I understand it, they didn't have other facilities until the 1980s.
See http://www.coin-opcommunity.co.uk/wp-content/uploads/2013/07/Bell-Fruit-Article.pdf
User avatar
badpenny
Forum Moderator
Posts: 7212
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Bell-Fruit Manufacturing Co. bandits

Post by badpenny »

Here's one I have recently acquired.

IMG_3271a.jpg


IMG_3274a.jpg

I've not long returned from a trip down North to visit a good friend, fellow collector and a forum member.
Turns out the first two were out at bingo so I was stuck with the last one.
Taking the opportunity to revisit the private pub in his garden and gaze upon his machines, I was also there to pick one up.
A Bell Fruit 1960s Bandit
For this post I shall protect his identity and refer to him as Wilbur, that's not his real name of course. His real name is Heath Breckenbridge.

If you've ever been to visit him you'll already know that whichever direction you sail in from it's the final 5 miles that gets you. Unlike Rome, no roads lead to Wilbur's house. On this occasion even the woman who lives in my dashboard threw in the towel.
I'd just exited the bypass around the red light district when her despairing voice wailed out “GPS signal lost” Which in itself is a quandary when you consider that you're currently at 1,214ft above sea level. Any higher and you'd have to duck so the bloody GPS gizmo missed your head on its next time round.

As a consequence I missed the turning opposite the “The Flat Cap & Whippet Emporium (Clogs & Hobnails a Speciality) ” and had to go on to where the cobblestones end and the bridleway commenced. Luckily I was able to turn in the car park of the pub named after the famous Yorkshire Cowboy “Tex the Piss” and try again.
20 minutes later and I find him in his garage sanding side vendors, we haven't seen each other since Parkhurst and retire to his garden pub where it isn't snowing to catch up.
For any of you who don't know him, he's a name to watch. His standard of restoration is to be seen to be believed. In my opinion he has an eye for detail that can't be faulted, he puts it down to his OCD.
It wasn't an easy decision for him to sell me the Bell Fruit. He describes it as his first bandit and was his Father's.
Like everything he does if it needs something doing he does it.
In this case the whole of the front door and other parts have been rechromed, and the graphics redone. The metal case expertly sprayed.
It's always good to see him, especially has he has another bandit I covert ...

thumbnail_IMG_20220202_125015a.jpg


IMG_20220202_125807a.jpg

Finally for any of you who don't know, these machines have never really been very collectable. I think that's probably due to them not being very popular with arcade/fairground operators. The business model that supported their manufacture was the licensed trade/clubs/pubs which itself lasted only a few years before those industries took charge and created their own sub divisions to supply and control AWP machines.
So it's easy to see how many have missed out on appreciating such a superbly engineered 3 reeler based on a Watling Mechanism with a rotary escalator, and in the case of mine a goose neck coin entry!

BP !!RAYOF!!
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests