Need help with Peerless viewer

Somebody knows... Maybe you?
Post Reply
jofjof27
Posts: 1
Joined: Sun Oct 03, 2021 7:13 pm
Reaction score: 0

Need help with Peerless viewer

Post by jofjof27 »

Hello,
I just bought a Peerless Mutoscope (bleu) in perfect condition and working properly at first. The problem is that due to the transport, the mechanism is defective. The engine starts, but the cards don't move. I suppose I have to reset the machine in start mode again, but how? Can you help me?
Can you also tell me if, by any chance, it is possible to find an operator manual?
Thanks in advance,
JOF
User avatar
gameswat
Posts: 2196
Joined: Sat May 30, 2009 5:17 am
Reaction score: 21
Location: perth, australia

Re: Need help with Peerless viewer

Post by gameswat »

You asked about a manual and I've never heard of one existing. There is a flyer and I have a copy, but the original belongs to a friend and he plans to publish sometime so I can't. It only shows similar to my photos in the link: Re: Coin operated stereo viewers. My machine is long gone though, so I have no other info at hand.
User avatar
brigham
Posts: 1180
Joined: Tue Oct 31, 2017 3:37 pm
Reaction score: 2

Re: Need help with Peerless viewer

Post by brigham »

Looking at the mechanism, it seems both well-constructed and easily laid-out.
I would think that working along from the part which IS moving, to the part which ISN'T, will identify the fault.
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests