Mills / Jubilee reel strips

Somebody knows... Maybe you?
Post Reply
vince93
Posts: 2
Joined: Wed Oct 20, 2021 7:12 am
Reaction score: 0

Mills / Jubilee reel strips

Post by vince93 »

Hi all,
I am currently working on a "Mills" slot machine (pic 1) that needs new reel strips (pic 2).
I've been unable to find any information about the machine online.
The closest I found were Jubilee slot machine (pic 3).
Any help would be greatly appreciated.
Attachments
Pic 1
Pic 1
Pic 2
Pic 2
Pic 3
Pic 3
User avatar
badpenny
Forum Moderator
Posts: 7211
Joined: Thu May 05, 2005 12:41 pm
Reaction score: 25
Location: East Midlands

Re: Mills / Jubilee reel strips

Post by badpenny »

Well I've never seen a Mills machine like that before.
Plenty of Jubilees but no Mills.
Is the mech stamped Ainsworth Dental Co I wonder?

BP !PUZZLED!
Edited to add: - I wasn't seriously suggesting a Jubilee would be marked "Ainsworth Dental Co" In my addled mind I was trying to cross reference as many manufacturers as would be unlikely as it's clearly not Mills."
User avatar
treefrog
Posts: 4813
Joined: Mon Sep 29, 2008 2:46 pm
Reaction score: 31
Location: Suffolk

Re: Mills / Jubilee reel strips

Post by treefrog »

I recall in Australia there was a misuse of Mills' name on a number of local machines. Not sure how they got away with it, but I am sure this had been discussed on one of the threads on Aussie machines. I assume you are based in Australia based on the coinage…….
User avatar
gameswat
Posts: 2196
Joined: Sat May 30, 2009 5:17 am
Reaction score: 21
Location: perth, australia

Re: Mills / Jubilee reel strips

Post by gameswat »

Since those are Aussie strips you'll be battling to ever find them. I've never even seen that particular variation. But what's the problem, you have all the symbols you need in good order anyway, so a very simple fix to scan and build up the missing strips to print out.
vince93
Posts: 2
Joined: Wed Oct 20, 2021 7:12 am
Reaction score: 0

Re: Mills / Jubilee reel strips

Post by vince93 »

Based in NZ.

The only markings I can find on the mech are British and Australian patent numbers , 'RRI' on the back of the mech and F/04615.

I did think about photocopying and reproducing the strip on computer, but I'm unsure of the proper order of the symbols on the missing segments.
pennymachines
Site Admin
Posts: 6638
Joined: Wed Nov 06, 2002 12:12 am
Reaction score: 56
Location: The Black Country

Re: Mills / Jubilee reel strips

Post by pennymachines »

Put some temporary paper strips over the reels and mark them out by observing the corresponding holes in the payout discs.
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests