Sega Mad Money Restoration
Re: Sega Mad Money Restoration
All the little dots are now filled with grey car filler. Smoother than a baby's bum.
Only took me all day, lol.
Only took me all day, lol.
Re: Sega Mad Money Restoration
Finished.
Inside of door.
From the outside, fitted, and nice and snug.
Inside of door.
From the outside, fitted, and nice and snug.
Re: Sega Mad Money Restoration
lol, er, no thanks.
I spent a stupid amount of time on that door, as I did with much of everything else, taking two years, or so all told. Doubt I could apply that level of effort on several more doors.
Only thing left, if I decide to do it, is a full mechanism disassembly, so that all the internal mechanical bits will look equally new too, but I haven't convinced myself to do that yet, especially as it just works. I have done hundreds and hundreds of plays, and there's never a hiccup.
For now, I will deploy it in its final home, and call it done, at least for a while.
Thanks TF, and all others who helped me get this far.
I spent a stupid amount of time on that door, as I did with much of everything else, taking two years, or so all told. Doubt I could apply that level of effort on several more doors.
Only thing left, if I decide to do it, is a full mechanism disassembly, so that all the internal mechanical bits will look equally new too, but I haven't convinced myself to do that yet, especially as it just works. I have done hundreds and hundreds of plays, and there's never a hiccup.
For now, I will deploy it in its final home, and call it done, at least for a while.
Thanks TF, and all others who helped me get this far.
Re: Sega Mad Money Restoration
I did post in this thread about making some springs for my restoration, but many of the posts got moved to a thread dealing with springs. It contains information about ebay lots, or similar, of mixed springs, and also on how to make your own from spring steel wire. Those I had missing, I made, and that method has worked perfectly for my needs. I too could have bought a mixed batch, but I got more satisfaction from learning how to make them, doing so, and then using them. Link to spring thread below:
Sourcing & making springs for slot machines
Sourcing & making springs for slot machines
- badpenny
- Forum Moderator
- Posts: 7221
- Joined: Thu May 05, 2005 12:41 pm
- Reaction score: 28
- Location: East Midlands
Re: Sega Mad Money Restoration
If you're asking because you're looking to source replacements, then ...
https://www.machinemart.co.uk/p/clarke- ... plit-pins/
... and cut to length.
BP
https://www.machinemart.co.uk/p/clarke- ... plit-pins/
... and cut to length.
BP
Who is online
Users browsing this forum: No registered users and 16 guests